Levelling the Washer Dryer

Levelling your Hoover Washer Dryer is crucial for stable operation. Begin by placing the appliance on a firm, even surface. Use the adjustable feet to achieve balance. Turn the nut clockwise to release the screw, then rotate the foot to raise or lower it until it touches the floor. Once adjusted, lock the foot by screwing the nut until it tightens against the machine’s base. Ensure the appliance does not wobble to prevent vibrations during cycles. Proper levelling ensures efficient washing and drying performance while minimizing noise and wear on internal components.

Connecting the Water Supply

Connect the water supply hoses to the corresponding taps, ensuring they are securely attached to both the appliance and the water supply. Avoid kinking or twisting the hoses, as this can restrict water flow. Use the hoses provided with the washer dryer, as they are specifically designed for this purpose. Once connected, turn on the water supply and check for any leaks around the connections. Ensure the water pressure is within the recommended range (min 0.1 Mpa, max 1 Mpa) to avoid damage. Regularly inspect the hoses for signs of wear and replace them if necessary to maintain optimal performance and safety.

Connecting the Drainage Pipe

Insert the corrugated drain hose into a suitable drain pipe located between 50 cm and 85 cm above the floor. Use the curved drain hose support to secure it in place. Ensure the hose is not kinked or trapped, as this can cause poor drainage. If connecting under a sink, route the hose above the sink’s overfill opening to prevent back siphoning. Regularly inspect the hose for signs of wear or damage. Replace it if necessary to maintain proper function and prevent leaks. Proper drainage is essential for efficient operation and to avoid water damage or mold growth. Always follow the manufacturer’s guidelines for installation.

Electrical Connection Requirements

Ensure the appliance is connected to a grounded electrical outlet with a voltage rating matching the specifications in the technical data section. Avoid using extension cords or adapters, as they may overload the circuit. The washer dryer requires a dedicated 220-240V, 50Hz power supply. The socket should be installed near the appliance for easy access. Always check the fuse rating and ensure it meets the appliance’s power input requirements, as specified on the rating plate. If unsure, consult a qualified electrician to ensure safe and proper installation. Proper electrical connection is crucial for safe operation and to prevent damage to the appliance or electrical system.

Operating the Hoover Washer Dryer

Operate your Hoover Washer Dryer using the intuitive control panel to select wash and dry programs. Adjust temperature, spin speed, and drying cycles as needed for optimal results. Use the ONE Fi EXTRA technology for remote control via the app for added convenience.

Control Panel Overview

The control panel of your Hoover Washer Dryer is designed for intuitive operation. It features a programme selector with an OFF position, a START/PAUSE button, and a DRYING SELECTION/STEAM FUNCTION button. The RAPID/STAIN LEVEL and OPTIONS buttons allow customization of cycles. Temperature and spin speed can be adjusted using dedicated controls. The digital display provides real-time updates on the machine’s status, including active settings and progress. Indicator lights signal door lock status and selected options. For remote control, the ONE Fi EXTRA technology enables app management via Wi-Fi. Ensure the door is closed before starting. Refer to the manual for detailed guidance on optimizing your appliance’s performance and features.

Selecting Wash and Dry Programs

Selecting the right wash and dry programs on your Hoover Washer Dryer ensures optimal cleaning and care for your clothes. Use the programme selector to choose from a variety of cycles tailored to fabric type and soil level. For energy efficiency, the Eco 40-60 program is ideal for everyday laundry. Timed drying programs allow you to set specific drying durations. The steam function enhances stain removal, while options like rapid wash and prewash adapt to your needs. Adjust settings using the control panel buttons to customize temperature, spin speed, and drying levels. Always match the program to the fabric care label for best results. This ensures your clothes are cleaned and dried effectively while preserving their quality.

Adjusting Temperature and Spin Speed

Adjusting the temperature and spin speed on your Hoover Washer Dryer ensures your clothes receive the best care. Use the temperature selection button to choose from cold, warm, or hot settings. For a cold wash, ensure all temperature indicators are off. The spin speed can be adjusted using the spin speed button, with options like high, medium, or low. Higher spin speeds are ideal for heavily soiled items, while lower speeds are gentler on delicate fabrics. Always match the settings to the fabric type and soil level for optimal results. Adjusting these settings helps preserve your clothes and ensures efficient washing and drying.

Using the Drying Cycle

Using the drying cycle on your Hoover Washer Dryer is straightforward. Select the desired drying program based on the fabric type and soil level. Timed drying options allow you to choose specific durations for delicate or heavily soiled items. Use the drying selection button to activate the cycle. The appliance features a cool down phase during the final 10-20 minutes to prevent overheating. Ensure the filter is clean before starting the drying cycle for optimal performance. Always check the maximum load capacity for dry clothes, as indicated on the control panel. For best results, leave the door slightly open after the cycle to prevent moisture buildup and odors. Regularly cleaning the filter ensures efficient drying and prevents damage to your clothes and the machine. Proper use of the drying cycle extends the life of your appliance and keeps your clothes in great condition. Follow these steps to achieve perfectly dried laundry every time. Always refer to the user manual for specific guidelines tailored to your model. By adhering to these instructions, you can ensure safe and effective use of the drying function. This helps maintain the quality of your clothes and the longevity of your Hoover Washer Dryer. Proper maintenance and adherence to guidelines are key to optimal performance.

Start/Pause Function

The Start/Pause function allows you to control your Hoover Washer Dryer cycle effortlessly. To begin, ensure the door is fully closed before pressing the Start/Pause button. The door lock indicator will illuminate, confirming the door is secure. Once pressed, the cycle will commence, and the indicator will remain lit. If the door is not properly closed, the light will flash for about 7 seconds before the command is canceled. Press Start/Pause again to resume once the door is correctly closed. This feature ensures safe and efficient operation, preventing accidental starts and maintaining cycle integrity. Always verify the door is locked before starting the machine to avoid interruptions and ensure optimal performance. Proper use of the Start/Pause function is essential for smooth operation and longevity of your appliance.

Delay Start Feature

The Delay Start feature on your Hoover Washer Dryer allows you to schedule the wash cycle to begin at a later time, offering flexibility and convenience. To use this feature, simply load the machine, select the desired program, and set the delay time using the Delay Start button. The delay can be set up to 24 hours in advance, giving you the freedom to plan your laundry around your schedule. Once set, the machine will automatically start at the selected time. This feature is ideal for optimizing energy usage or ensuring your laundry is ready when you need it. Always ensure the door is closed and detergent is added before setting the delay for uninterrupted operation.

Maintenance and Care

Regular maintenance ensures optimal performance and extends the lifespan of your Hoover Washer Dryer. Clean the detergent drawer, check filters, and inspect hoses for blockages or damage.

Cleaning the Detergent Drawer

Cleaning the detergent drawer is essential to prevent residue buildup and maintain optimal performance. Remove the drawer by pulling it out gently. Soak it in warm water mixed with mild detergent to dissolve any debris. Use a soft brush to scrub away stubborn stains or detergent residue. Rinse thoroughly and allow it to dry before reinstalling. Regular cleaning ensures proper detergent distribution and prevents unpleasant odors. Always refer to the manual for specific instructions tailored to your Hoover model. This simple maintenance step helps prolong the life of your washer dryer and ensures efficient cleaning cycles.